DVDFab does not change the video standard between NTSC and PAL.
If your original Blu-ray disc is in NTSC standard, then the converted DVD video will be in NTSC too.
If your original Blu-ray disc is of PAL standard, then you will get a converted DVD with PAL standard correspondingly.
There are 3 ways to playback these output 3D files:
1. PC + 3D video player software;
A compatible NVIDIA graphic card with the latest driver and 3D video players are required. We recommend NVIDA 3D Vision Video Player
and 3dtv.at player at http://www.3dtv.at/Downloads/Index_en.aspx
2. TV + 3D TV device;
Please make sure your TV support the transmission of 3D content, upgrade the firmware of set-top-box or change a superior replacement would be necessary. Also you need Red/Blue 3D glasses to watch 3D video.
3. 3D digital viewer (such as iPad which can playback avi, mkv, mp4... files only).
Getting 3D video playback on your iPad, you need to rip the original blu-ray 3D disc by DVDFab firstly, then sync the converted mkv/avi/mp4 files to your iPad. This will be the best popular way of Naked Eyes. We are working on this ripping feature for special devices, there are really much more surprise and benefits to look forward to.
In side-by-side 3D, a full 1080p or 720p frame consists of two halves on the left and right, with the
entire frame for the left eye scaled down horizontally to fit the left-half of the frame, and the entire
frame for the right eye scaled down horizontally to fit the right side of the frame. Thus, in the case
of 720p content (resolution of 1280 x 720), each frame will actually consist of the horizontally scaled
frame for the left eye with a resolution of 640 x 720 and adjacent to it, the corresponding frame for
the right eye at the same 640×720 resolution. When the 3D ready TV receives this side-by-side
3D signal, it splits each frame to extract the frame for each eye, and then rescales these individual
frames to a full HD resolution using upscaling algorithms. It then displays these upscaled individual
frames alternately in a frame-sequential manner that is in sync with your active shutter 3D glasses.
To sum up, it is just a method to deliver 3D content and also provides an excellent 3D viewing
Normally, the resulting ripping process ranges from 45 minutes to 90 minutes, compression process ranges from 60 minutes to 150 minutes. That all depends on your computer configuration, the size of source blu-ray disc(bd50/bd25), the output target (bd25/bd5/bd9) you chose, compression involved or not, etc.
If you have NVIDIA or ATI's graphics card, which will make possible hardware acceleration when ripping/compressing blu-ray discs. CUDA and DXVA technology will enable you rip/compress Blu-rays in a much faster speed.
DVDFab integrated Intel Quick Sync technology in Blu-ray Copy make it a much faster video conversion. If you have DVDFab 184.108.40.206 Beta (or later version) installed on your computer, and you have supported hardware (Intel Sandy Bridge（SNB）CPU; Intel G45/GM45 Express Chipset; Intel HD Graphics) on your computer for Intel Quick Sync, then you can enable this high tech in DVDFab for a crazy fast conversion. For more information https://www.dvdfab.cn/manual/settings/av-codec
Please follow the step-by-step guides to register and login DVDFab User Center.
1. Please visit https://www.dvdfab.cn/member.htm, click on "Register" button, fill in the E-mail address you used to purchase DVDFab product and identifying code, then you will get an confirmation E-mail with the link to set password.
2. After setting your password, go back to https://www.dvdfab.cn/member.htm to login user center, where you can change E-mail, download key, renew and upgrade DVDFab products, subscribe or unsubscribe DVDFab newsletter, etc.
3. If you already have an user account, but you lost the password, please click "" to reset it.
This issue may caused by following issues:
DVDFab DVD Ripepr, Blu-ray Ripper and Blu-ray 3D Ripper can deal with Forced Subtitles. Users have the options whether or not to display the forced subtitles while converting.
Yes, you can contact us at https://www.dvdfab.cn/contact.htm, then we will help you change in our database.
No, according to our License Agreement, Single-User License can be used to register DVDFab product on only one machine, no more.
Our software can not be ordered in any stores.Our payment platform is 100% secure. You don't need to worry about that.
Storewide 20% Off is available.
Go copy and apply the coupon code:
when you arriving at the checkout page.
Notice that this coupon is only valid till:
Feb 3, 2018
Get FREE $20 Amazon Gift Card
The Universal Master Key
for All Protected DVDs & Blu-rays.
World's Best DVD Combo
to Tackle All DVD Copying/
Burning/Cloning/ Ripping Issues